Click para agrandar

DESCRIPTION: Es PIC-PG3B es un programador basado en el diseño de D.Tait's que utiliza el puerto paralelo. Para operar necesita alimentacion externa de 12-15VAC o 16-18VDC. Soporta microcontroladores PIC de 8/18/28 y 40 pines. El PIC-PG3 posee un conector ICSP que puede utilizarse para programar cualquiera de nuestras tarjetas de desarrollo PIC-PxxB.

Guía para instalar el PG3 aqui 

DESCRIPTION: PIC-PG3B is programmer based on D.Tait's parallel port design. To operate it needs external power supply 12-15VAC or 16-18VDC. It supports all 8/18/28 and 40 pin PIC microcontrollers which allow serial programming. PIC-PG3 have connector and cable for ICSP programming and can be used to program all PIC-PxxB prototype boards.

DIMENSIONS: 75x58 mm (3x2.3')

HARDWARE: PIC-PG3B schematic

DOCUMENTS: pic-pg3b.pdf

SOFTWARE1: SHAREWARE software by Bojan Dobaj

SUPPORTED DEVICES:
PIC12C508, PIC12C508A, PIC12C509, PIC12C509A, PIC12CE518, PIC12CE519, PIC12C671, PIC12C672, PIC12CE673, PIC12CE674, PIC16C505, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62, PIC16C62A, PIC16C62B, PIC16C63, PIC16C64, PIC16C64A, PIC16C64B, PIC16C65, PIC16C65A, PIC16C65B, PIC16C66, PIC16C67, PIC16C620, PIC16C620A, PIC16C621, PIC16C621A, PIC16C662, PIC16C662A, PIC16CE623, PIC16CE624, PIC16CE625, PIC16C662, PIC16C71, PIC16C72, PIC16C73, PIC16C74, PIC16C74A, PIC16C74B, PIC16C76, PIC16C77, PIC16C710, PIC16C711, PIC16C715, PIC16C84, PIC16F83, PIC16F84, PIC16F84A, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16C923, PIC16C924

SOFTWARE2: FREE software by Nigel Goodwin

SUPPORTED DEVICES:
PIC16C84, PIC16F83, PIC16F84, PIC16F84A, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16F627, PIC26F628

SOFTWARE3: WinPic800

SUPPORTED DEVICES:
see the site http://perso.wanadoo.es/siscobf/winpic800.htm/